bigfoot

BIGFOOT EP GREASE

CLICK HERE FOR BIGFOOT MSDS 

Features:

  • Outstanding wide temperature range grease.
  • Unequalled water washout resistance.
  • Excellent shock load-carrying ability.
  • Rust and corrosion inhibited to protect metal surfaces.
  • Adhesive-tacky grease that “stays in place”.
  • Extreme pressure protection – 75 Lb. Timken OK Load Test.
  • Rust and corrosion inhibited to protect metal surfaces.
  • Dyed Fire Orange to better detect defective bearing seals.
  • Oxidation inhibitors permit high temperature operations.
  • Less down time on your equipment.
  • Melting point well above 500°F.
  • Excellent grease for most sealed-for-life bearings.
  • NLGI Certified GC-LB in wheel bearing and chassis applications

Typical Uses:

  • Recommended for wheel bearing, including disc brake applications, fifth wheels, U-joints, steering linkage, and chassis lubricant.
  • The adhesive and water resistance qualities of this grease make it an ideal chassis lubricant for “offroad” trucks, construction equipment, agricultural equipment, logging equipment and mining equipment.
  • Also recommended for rock crushers, oil field equipment, off shore drilling equipment and marine deck equipment.
  • Recommended for all types of bearings including plain bearings, heavily loaded journal bearings, ball and roller bearings, needle bearings and couplings.

This entry was posted in .

1

Crystal Blue FM Grease

MSDS:
34100B_Guardian_Crystal_FM2

Advantages:

  • Used for both plain and antifriction bearings in food processing equipment, especially high water wash or high
    temperature applications where H-1 greases are required.
  • High temperature oven and fan bearings
  • High water washout bearing applications
  • General purpose grease for all types of plants and “no-melt” conditions
  • Not recommended for high speed bearings operating over 3000 rpms

Features:

  • Exceptional high temperature bearing performance
  • Excellent resistance to water washout
  • High resistance to chemicals/cleaners
  • Wide operating temperatures (-40° F. to 600° F.)
  • Superior rust protection
  • Extreme pressure characteristics for maximum wear protection of highly loaded or shock loaded bearings
  • Adhesive, tacky grease that stays in place
  • Exceptional oxidation resistance for long service life
  • Certified Kosher and Pareve for Passover

This entry was posted in .

Crystal-Extreme-FM-2

Crystal Extreme FM 2

MSDS:
34162 Crystal Extreme

Advantages & Uses:

  • Used for both plain and antifriction bearings in food processing equipment, especially high water wash or high temperature applications where H-1 greases are required.
  • Extremely high temperature oven and fan bearings.
  • High water wash-out bearing applications.
  • General purpose grease for all types of plants and “no melt” conditions
  • Not recommended for high speed bearing operations over 3,000 rpm’s
  • Not for use in meat processing facilities

Features:

  • Exceptional high temperature bearing performance
  • Excellent resistance to water washout
  • Highly resistant to chemicals and cleaners
  • Extremely wide operating temperature range of (-40˚ F. to 600˚ F.).
  • Superior rust protection
  • Extreme pressure characteristics for maximum wear protection of highly loaded or shock loaded bearings
  • Adhesive, tacky grease that stays in place
  • Exceptional oxidation resistance for long service life
  • Certified Kosher and Pareve for Passover

This entry was posted in .

Crystal-FM-2

Crystal FM Grease

Advantages & Uses:

Used for the lubrication of all types of grease lubricated bearings commonly found in canneries, beverage bottling plants, potato chip plants, poultry processing plants, meat processing plants and other food processing plants, cosmetic and pharmaceutical industries, agriculture, logging, mining, electric motors and fans, robotics. Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620 and classified under USDA as a H-1 lubricant where incidental food contact might occur.

 Recommended for high speed bearings operating from 3,000 to 10,000 rpm

Features:

● Multi-purpose food machinery greases for many applications – reduced inventory

● Excellent for low temperature use down to -40˚ F. (-40˚C).

● High temperature protection – non-melt

● Provide superior “water washout” protection

● Excellent rust protection

● Crystal clear and odorless

● Virtually no oil separation

● Adhesive tacky grease that stays in place

 

This entry was posted in .

guardian

Food Machinery Grease

MSDS:
34005 Alum Comp FM Grease

Advantages & Uses

Used for the lubrication of all types of grease bearings commonly found in canneries, beverage bottling plants, potato chip plants, poultry processing plants, meat processing plants and other food processing plants.

Complies with Food and Drug Administration (FDA) Federal Regulation 178.3620 and classified under USDA as an H-1 lubricant where incidental food contact might occur.

Features:

  • Multi-purpose food machinery greases
  • For many applications – reduced inventory
  • High temperature protection
  • Excellent rust protection
  • Virtually no oil separation
  • Adhesive tacky grease that stays in place
  • Cost effective food grade lubricant
  • Compatible with aluminum, calcium, 12-hydroxy and lithium complex grease
  • Certified Kosher and Pareve for Passover

This entry was posted in .

redeye

Red-I Extreme Pressure Grease

Features:

  • Unexcelled water washout resistance due to high viscosity base oils fortified with polymers.
  • Great protection against failures caused by shock loading.
  • Extreme pressure protection – Exceeds 70 pounds OK Load in the ASTM D-2509 Timken Test.
  • Critical metal surfaces of moving parts are protected from rust and corrosion.
  • Distinctive red color quickly identifies the grease and helps detect defective bearing seals.
  • Reduced maintenance expense because “stay-in-place and lubricate” attribute means less frequent greasing intervals and extended equipment life.
  • Oxidation inhibitors permit operations at high temperatures for extended periods.
  • NLGI certified GC-LB in wheel bearing and chassis applications.

Typical Uses:

  • Recommended for wheel bearing including: Disc brakes applications, fifth wheel, U-joint, steering linkage and chassis lubrication.
  • An ideal chassis lubricant for “on & off road” equipment in agriculture, construction, logging, trucking and mining service where severe water washing or shock loading protection is needed.
  • Recommended for industrial plain bearings and antifriction bearings operating under shock-loads or wet and dirty conditions.
  • NOT RECOMMENDED FOR SMALL ANTI-FRICTION BEARINGS OPERATING OVER 5000 RPM.

This entry was posted in .